Re: [44net] jnos and ubuntu 12.04 - 44net

22 Jul 2012

ok  I got the tun0 working in Ubuntu 12.04 gui version and also the tun0 is working in
jnos as well.
only problem I am having is getting out to the rest of the world and I believe it's
just a router problem
not having the new addresses for the new machine. haven't tested the radio's part
yet to see if there
slow.  but at least the tun0 is up

73 Russ WL7LP

________________________________
 From: Ted Gervais &lt;ve1drg(a)gmail.com&gt;
To: Russ WL7LP &lt;wl7lp(a)yahoo.com&gt; 
Sent: Sunday, July 22, 2012 10:10 AM
Subject: Re: [44net] jnos and ubuntu 12.04

Yes Russ.  The server version works great especially where it doesn't need as much
memory/resources etc..  That is why I went to that version.  I have a very old computer
here with limited memory so the server version fit the bill.

On Sun, Jul 22, 2012 at 1:53 PM, Russ WL7LP &lt;wl7lp(a)yahoo.com&gt; wrote:

Hi Ted. 
...

Thanks Ted.  that's good to know it works fine with the server version. I am running
the GUI version.
though I may switch to the server version if can't get it working with the gui
version.

73 Russ WL7LP

________________________________
 From: Ted Gervais &lt;ve1drg(a)gmail.com&gt;
To: Russ WL7LP &lt;wl7lp(a)yahoo.com&gt;om>; AMPRNet working group
&lt;44net(a)hamradio.ucsd.edu&gt; 
Sent: Sunday, July 22, 2012 9:32 AM
Subject: Re: [44net] jnos and ubuntu 12.04

Hi Russ.

I run the latest Jnos on Ubunty 12.04LTS (server edition).
It works fine.  No problems that I know of, in particular the tun0 feature. 
That works without a problem.

On Sun, Jul 22, 2012 at 12:22 PM, Russ WL7LP &lt;wl7lp(a)yahoo.com&gt; wrote:

(Please trim inclusions from previous messages)
 _______________________________________________

I been trying to get jnos and ubuntu 12.04 LTS to work for a week now and no joy at it.
tun0 will not loaded from jnos at all. only way I found it does is to start jnos as sudo

sudo ./jnos that loads the tun0 sometimes but then another stuff don't work and
crashes
shortly after. some say to get both to work  you need to load the tun0 before jnos.
never tried it yet but have a coupe of files createtun0.c that you compile into a binary
and run it 

that will load the tun0 with what name you give it. going to try that. a friend of mine
did it and seem
to be working good for him.  but if there is a solution to jnos and ubuntu 12.04 I should
would love
to hear about it.

73 Russ WL7LP

________________________________
 From: Daniel Curry &lt;daniel(a)danielcurry.net&gt;
To: 44net(a)hamradio.ucsd.edu 
Sent: Saturday, July 21, 2012 7:51 AM
Subject: [44net] jnos and ubuntu 12.04

(Please trim inclusions from previous messages)
_______________________________________________
   I am hearing from local hams that jnos and ubuntu 12.04 LTS are not
compatible?
Reasons:

1) unable to telnet tun0 port to the jnos application from the linux host
2) Something about module for tun not getting loaded
3) Response time from the radio side is slow on connections.

  Can someone shed some light if there is a compatibility issue and what
are the hoops that must be configured, if any?

-- 
Daniel Curry
PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92

San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]

_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net

_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net

-- 

Ted Gervais (ve1drg)
1464 Luxury Ave
Windsor, Ont
N8P 0A9
(519)956-9776

-- 

Ted Gervais (ve1drg)
1464 Luxury Ave
Windsor, Ont
N8P 0A9
(519)956-9776