About a year and a half ago I have asked how good will be the AmprNet to use to connect DMR repeaters
So finaly i have made a HotSpot and connected it to the AmprNet and it connect to our Server via the AmprNet
I use tunnel to UCSD and not BGP so traffic travel to UCSD
The results are impressive
No problem at all although the latency is big no words loose or packet loss
The only thing i see is a bit delay until the Hotspot start to transmit and this is (probably ) because the latency so the PTT command delay a bit
It is a high power hotspot consist of a 25 Watt radio connected to a MMDVM system so users use it and i didnt get any complain of any disconnection or any issue of networking or service so far
If you are interested the statistic of the MikroTik Router that handle the AmprNet traffic show about 12Kbit/Sec UDP when the data flow from the hotspot to the server
Ronen - 4Z4ZQ
Ronen Pinchooks (4Z4ZQ) WebSitehttp://www.ronen.org/ www.ronen.org ronen.org (Ronen Pinchooks (4Z4ZQ) WebSite) is hosted by domainavenue.com
-
R P