I added some logging back in but seems I need to do it in multiple places. I dont see the routes being deleted watching the rIP --> Routes window. Leon On 4/10/2016 9:04 AM, Leon Zetekoff wrote: > (Please trim inclusions from previous messages) > _______________________________________________ > Hi Marius...did you remove the prints that show that the script starts > and ends? > being > Thanks leon > > On 4/9/2016 5:10 PM, Marius Petrescu wrote: >> (Please trim inclusions from previous messages) >> _______________________________________________ >> Hello, >> >> I just updated the gateway setup scripts for Mikrotik routers to make >> the system more robust. >> >> It now consists of 2 scripts: >> - the parent script (update_amprgw) which is scheduled every 5 >> minutes, on 1 min pat the RIP announcement >> - the actual update script (ampr_gw) which called from the parent script >> >> The parent script will: >> - prevent run overlaps >> - after 3 unsuccessful schedules will consider the update script >> failed end will enforce a run >> - it will prevent tunnel updates if less than 100 RIPv2 routes are >> available >> >> The scripts and schedule entry are in Mikrotik export format. >> The file can be copied into the router and loaded using the import >> command or the content copy/pasted into the console. >> >> After this step, edit your config in the ampr_gw script under >> system->scripts and enable the scheduler entry (disabled by default). >> >> Download from: >> http://www.yo2loj.ro/hamprojects/ampr-gw-1.5.rsc >> http://yo2tm.ampr.org/hamprojects/ampr-gw-1.5.rsc >> >> Have fun, >> >> Marius, YO2LOJ >>