26 Dec
2015
26 Dec
'15
3:20 p.m.
Hello all,
This is a little off the topic of 44 network, but I am curios. The
44 network is split into many regions for Amateur Radio to use.
But does anyone know on how the10.x.x.x network is assign to Amateur
Radio Ham Mesh network?
Is there someone or a group that have the responsibility on dishing ip
addresses? Sorry for the band width, but
just curios.
K6DLC
--
Daniel Curry
IPV6 Sage Certified
PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92
San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]
26 Dec
26 Dec
3:59 p.m.
Officially 10.x.x.x/8 is a private network address, like 192.168.x.x/24 and
172.16.0.0/12, and, together with 169.254.0.0/24 (zeroconf assignation)
should NEVER leave a private, isolated network.
IMHO this should also be the case in the AMPR world and those addresses
should never be forwarded to "unaware" hosts.
So if you want to interlink with other sites using this subnet, you can of
course do it, but this is not regulated, and the above actions should be
taken.
Marius, YO2LOJ
-----Original Message-----
From: Daniel Curry
Sent: Saturday, December 26, 2015 17:20
To: 44Net(a)hamradio.ucsd.edu
Subject: [44net] Ham Class network
(Please trim inclusions from previous messages)
_______________________________________________
Hello all,
This is a little off the topic of 44 network, but I am curios. The
44 network is split into many regions for Amateur Radio to use.
But does anyone know on how the10.x.x.x network is assign to Amateur
Radio Ham Mesh network?
Is there someone or a group that have the responsibility on dishing ip
addresses? Sorry for the band width, but
just curios.
K6DLC
--
Daniel Curry
IPV6 Sage Certified
PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92
San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
4:12 p.m.
To add to what Marius mentions below you may want to look at:
http://www.faqs.org/rfcs/rfc1918.html
On Sat, 2015-12-26 at 17:59 +0200, Marius Petrescu wrote:
(Please trim inclusions from previous messages)
_______________________________________________
Officially 10.x.x.x/8 is a private network address, like 192.168.x.x/24 and
172.16.0.0/12, and, together with 169.254.0.0/24 (zeroconf assignation)
should NEVER leave a private, isolated network.
IMHO this should also be the case in the AMPR world and those addresses
should never be forwarded to "unaware" hosts.
So if you want to interlink with other sites using this subnet, you can of
course do it, but this is not regulated, and the above actions should be
taken.
Marius, YO2LOJ
-----Original Message-----
From: Daniel Curry
Sent: Saturday, December 26, 2015 17:20
To: 44Net(a)hamradio.ucsd.edu
Subject: [44net] Ham Class network
(Please trim inclusions from previous messages)
_______________________________________________
Hello all,
This is a little off the topic of 44 network, but I am curios. The
44 network is split into many regions for Amateur Radio to use.
But does anyone know on how the10.x.x.x network is assign to Amateur
Radio Ham Mesh network?
Is there someone or a group that have the responsibility on dishing ip
addresses? Sorry for the band width, but
just curios.
K6DLC
--
The only thing worse than an extreme left-wing state is an extreme
left-wing commonwealth protected by the sovereign doctrine.
73 de Brian - N1URO
email: (see above)
Web: http://www.n1uro.net/
Ampr1: http://n1uro.ampr.org/
Ampr2: http://nos.n1uro.ampr.org
Linux Amateur Radio Services
axMail-Fax & URONode
http://uronode.sourceforge.net
http://axmail.sourceforge.net
AmprNet coordinator for:
Connecticut, Delaware, Maine,
Maryland, Massachusetts,
New Hampshire, Pennsylvania,
Rhode Island, and Vermont.
4:44 p.m.
The ham meshnet folks use net 10 internally; they assign the addresses
by a formula. They don't have a central IP authority. I don't recall
the exact formula and whether it's based on an encoding of the callsign
or the location of the station, but it was explained in a paper they published
in a past TAPR DCC, either 2013 or 2014.
- Brian
5:12 p.m.
Hi,
In Poland we use 44.165.xxx.xxx to local Mesh networks (base on OLSRD,
BATMAN or BABEL) on 2.3 and 5.6 GHz and for this reason each mesh node can
connect with others from 44/8 network
73 Waldek SP2ONG
2015-12-26 17:44 GMT+01:00 Brian Kantor <Brian(a)ucsd.edu>du>:
(Please trim inclusions from previous messages)
_______________________________________________
The ham meshnet folks use net 10 internally; they assign the addresses
by a formula. They don't have a central IP authority. I don't recall
the exact formula and whether it's based on an encoding of the callsign
or the location of the station, but it was explained in a paper they
published
in a past TAPR DCC, either 2013 or 2014.
- Brian
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
--
Waldek sp2ong
3045
days inactive
3045
days old
4 comments
5 participants
participants (5)
-
Brian -
Brian Kantor -
Daniel Curry -
Marius Petrescu -
Waldek SPdwaONG