20 Mar
2016
20 Mar
'16
2:10 p.m.
Hi
Does anyone know what ports \ protocols needed to be open to allow ipip tunneling ?
The Idea is not to place the gateway in the DMZ in a home internet connection
when the gateway sit there /
Thanks Forward
Ronen - 4Z4ZQ
http://www.ronen.org
Ronen Pinchooks (4Z4ZQ) WebSite<http://www.ronen.org/>
www.ronen.org
ronen.org (Ronen Pinchooks (4Z4ZQ) WebSite) is hosted by domainavenue.com
20 Mar
20 Mar
2:14 p.m.
New subject: ports / Protocoles needed to be opened for a gateway ?
You need only IP protocol 4 (encap).
-----Original Message-----
From: R P
Sent: Sunday, March 20, 2016 20:10
To: AMPRNet working group
Subject: [44net] ports / Protocoles needed to be opened for a gateway ?
(Please trim inclusions from previous messages)
_______________________________________________
Hi
Does anyone know what ports \ protocols needed to be open to allow ipip
tunneling ?
...
3:04 p.m.
New subject: ports / Protocoles needed to be opened for a gateway ?
To be more specific, IPIP is a low level protocol that rides on IPv4 or
IPv6 - for example:
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
protocol number 4 - IPIP
protocol number 6 - TCP
protocol number 17 - UDP
Not all home routers will allow for forwarding of this traffic but some
routers support a "DMZ" feature where all unknown traffic will be sent.
This port then might have the protocol 4 traffic you're looking for.
--David
KI6ZHD
On 03/20/2016 11:14 AM, Marius Petrescu wrote:
(Please trim inclusions from previous messages)
_______________________________________________
You need only IP protocol 4 (encap).
3169
days inactive
3169
days old
2 comments
3 participants
participants (3)
-
David Ranch -
Marius Petrescu -
R P