26 Sep
2016
26 Sep
'16
11:45 a.m.
I have some dumb questions about setting up the
MicroTik. I currently have
everything set(I got all the RIP records and routes created), however, it
can't talk to the internet. I'm trying to figure out, would this be a
firewall issue? Do I need to create a whole new NIC just for the 44net?
When you want to route from net-44 addresses to internet (non-net-44), and
your ISP implements source address filtering (BCP38) you need to setup policy
routing, because you need a separate default route for traffic from your public
internet address (pointing to your ISP) and for traffic from your net-44
systems (pointing to the IPIP tunnel to UCSD).
Rob
26 Sep
26 Sep
12:32 p.m.
New subject: Fwd: MicroTik and Dumb Questions
Rob,
I thought the script took care of routing. So I would have to create new routes for 44net
to go to the IPIP tunnel?
Sent from my iPhone
On Sep 26, 2016, at 11:45 AM, Rob Janssen
<pe1chl(a)amsat.org> wrote:
(Please trim inclusions from previous messages)
_______________________________________________
I have some dumb questions about setting up the
MicroTik. I currently have
everything set(I got all the RIP records and routes created), however, it
can't talk to the internet. I'm trying to figure out, would this be a
firewall issue? Do I need to create a whole new NIC just for the 44net?
When you want to route from net-44 addresses to internet (non-net-44), and
your ISP implements source address filtering (BCP38) you need to setup policy
routing, because you need a separate default route for traffic from your public
internet address (pointing to your ISP) and for traffic from your net-44
systems (pointing to the IPIP tunnel to UCSD).
Rob
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
2979
days inactive
2979
days old
1 comments
2 participants
participants (2)
-
Miguel R -
Rob Janssen