Bill,
I don't know what Lynwood has, but as a winter project I was going to attempt the same thing on a Netgear WNR3500Lv2 running OpenWRT.
It too has: 5 GigE Ports, and a USB 2.0 Port
128 MB NAND flash and 128 MB RAM
Steve, KB9MWR
on a Netgear WNR3500Lv2 running OpenWRT.
Little black box - for $42 with free shipping - with more embedded resources than some of the workstations I still use at home. Now if only JNOS ran on OpenWRT.
http://www.amazon.com/NETGEAR-WNR3500L-Open-Source-WNR3500Lv2-Processor/dp/B...
73 Bill
Does anyone know if the Netgear WNR3500L has 5 independent gigE ports, i.e. Are they layer 3 nics or are two or more of them on a switch (layer 2)?
Thanks, Chris
The swich chip it is BCM53115S, which services the WAN and LAN port:
http://www.broadcom.com/products/Switching/Home-and-Small-Business/BCM53115
It features 2 MII interfaces, but it is not clear from the data sheet if it supports isolated port access, probably not. But it supports per port VLANs.
So tagging all untagged traffic on a specific port with a VLAN ID can make the port act as an isolated port...
-----Original Message----- From: 44Net [mailto:44net-bounces+marius=yo2loj.ro@hamradio.ucsd.edu] On Behalf Of Chris Sent: Sunday, August 16, 2015 10:27 To: AMPRNet working group Subject: Re: [44net] OpenWRT
(Please trim inclusions from previous messages) _______________________________________________ Does anyone know if the Netgear WNR3500L has 5 independent gigE ports, i.e. Are they layer 3 nics or are two or more of them on a switch (layer 2)?
Thanks, Chris _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
-
Bill Vodall -
Chris -
Marius Petrescu -
Steve L