Hello,
I've mapped 2 blocks ( 44.158.128.0/20 & 44.158.158.0/23 ) in the AMPR portal, to the gateway 193.137.237.9
Both blocks have the "Tunnel" checkbox active.
When I generate traffic from the Internet to the IP 44.158.128.1 I can see some encapsulated (IPoIP porto 4) arriving but when the target is 44.158.158.1 (or any other IP from the 2nd IP block) no traffic arrives.
The routes are being advertised in the RIPv2 announces and in the "encap" file, as expected.
I'm I missing something?
thanks for all the work done keeping this net!
regards.
tcpdump:
16:58:38.871024 IP 169.228.34.84 > 193.137.237.9: IP 194.210.189.129 > 44.158.128.1: ICMP echo request, id 19244, seq 1, length 64 (ipip-proto-4) 16:58:39.871090 IP 169.228.34.84 > 193.137.237.9: IP 194.210.189.129 > 44.158.128.1: ICMP echo request, id 19244, seq 2, length 64 (ipip-proto-4) 16:58:40.870884 IP 169.228.34.84 > 193.137.237.9: IP 194.210.189.129 > 44.158.128.1: ICMP echo request, id 19244, seq 3, length 64 (ipip-proto-4) 16:58:41.871032 IP 169.228.34.84 > 193.137.237.9: IP 194.210.189.129 > 44.158.128.1: ICMP echo request, id 19244, seq 4, length 64 (ipip-proto-4) 16:58:42.870926 IP 169.228.34.84 > 193.137.237.9: IP 194.210.189.129 > 44.158.128.1: ICMP echo request, id 19244, seq 5, length 64 (ipip-proto-4)
Pedro,
In order for traffic from the internet to reach your host through a tunnel from UCSD, it must be registered in the ampr.org DNS.
There are no entries in the DNS for 44.158.158.x. If you would like me to add some, please send me private email off-list of the hostnames and addresses you want added. - Brian
On Tue, Oct 24, 2017 at 06:00:56PM +0100, Pedro Ribeiro wrote:
Hello,
I've mapped 2 blocks ( 44.158.128.0/20 & 44.158.158.0/23 ) in the AMPR portal, to the gateway 193.137.237.9
Both blocks have the "Tunnel" checkbox active.
When I generate traffic from the Internet to the IP 44.158.128.1 I can see some encapsulated (IPoIP porto 4) arriving but when the target is 44.158.158.1 (or any other IP from the 2nd IP block) no traffic arrives.
The routes are being advertised in the RIPv2 announces and in the "encap" file, as expected.
I'm I missing something?
thanks for all the work done keeping this net!
regards.
Thank you for the clarification. I'll add the DNS entries. regards!
On 24-10-2017 18:12, Brian Kantor wrote:
Pedro,
In order for traffic from the internet to reach your host through a tunnel from UCSD, it must be registered in the ampr.org DNS.
There are no entries in the DNS for 44.158.158.x. If you would like me to add some, please send me private email off-list of the hostnames and addresses you want added.
- Brian
On Tue, Oct 24, 2017 at 06:00:56PM +0100, Pedro Ribeiro wrote:
Hello,
I've mapped 2 blocks ( 44.158.128.0/20 & 44.158.158.0/23 ) in the AMPR portal, to the gateway 193.137.237.9
Both blocks have the "Tunnel" checkbox active.
When I generate traffic from the Internet to the IP 44.158.128.1 I can see some encapsulated (IPoIP porto 4) arriving but when the target is 44.158.158.1 (or any other IP from the 2nd IP block) no traffic arrives.
The routes are being advertised in the RIPv2 announces and in the "encap" file, as expected.
I'm I missing something?
thanks for all the work done keeping this net!
regards.
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
-
Brian Kantor -
Pedro Ribeiro