Hi Paul I have found the Original files of my gateway that was active 15 years ago It tern out it used a 3c905 PCI cards (i have found the original cards in the shack ) I even found a Packet driver for the on board lan card of my PC I have installed the Jnos with the old original CFG files and changed only the IP adresses of ampr.org (what used to be that time mirrorshades) and the internet ip on my current network and the software run without errors It is still not connected to the network because i still have no allocation of the 44 network IP and therefore no route of 44.138 adress to the gateway yet but its a good start Now next step is to run it under windows (XP) Has any one run a Gateway (jnos or any other software) under windows XP ? i dont want to have a dedicated PC running only dos where i can have a pc running windows and beside dealing with routing can do also other instances (such as running SDR software or winpkt etc ... please advice Thanks forward Ronen - 4Z4ZQ http://www.ronen.org
Thanks ----- Original Message ----- From: "Paul Lewis" paul@skywaves.demon.co.uk To: "AMPRNet working group" 44net@hamradio.ucsd.edu Sent: Sunday, December 27, 2015 10:17 PM Subject: Re: [44net] Packet driver fo Current net cards ?
(Please trim inclusions from previous messages) _______________________________________________ Hello Ronen
I still have floppy content around for 3com Ether ver 5.1 Etherlink pCI the packer driver is two files 3c90xpd.com and paket.txt combined size 50kb if interested Paul g4apl gb7cip
In message F68853C11CE8439DBB05A242D83C17FD@shanti, Drorap drorap@netvision.net.il writes
(Please trim inclusions from previous messages) _______________________________________________ Hi there i want to re alive a gateway running Jnos DOS (untill i will be eble to replace it with the Cisco router im trying to config) the old gateway i had used to be a PC with ISA Currently all my PCs are PCI i need a Packet driver for a well known PCI card (prefered intell or 3 Com ) I used to have Packet driver for 3C905 (ISA) Can i find any packet drivers for the PCI cards ? If not is there any solution to run JNOS DOS with netcard ? Im not a Software person so Suggestions to install linux and config it for gateway are not practical for me (i can probebly install the linux but certianly not add the Gateway Part (IPIP and JNOS ) Please advice Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
This email is free from viruses and malware because avast! Antivirus protection is active. https://www.avast.com/antivirus
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
-- paul@skywaves.demon.co.uk _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
--- This email is free from viruses and malware because avast! Antivirus protection is active. https://www.avast.com/antivirus