[44net] Re: Setup Edgerouter X

I'm trying to follow the instructions on https://wiki.ampr.org/wiki/Installing_ampr-ripd_on_a_Ubiquiti_EdgeRouter_or… but I'm not getting it and I've reset back to the default settings.  I've got the router setup and working as a gateway with external IP of 75.158.135.117 which was given by DHCP from my ISP and is on eth0.  On eth1 is set as my internal network as 192.168.1.1/24.  I have two ethernet adapters on my computer.  One is going to eth1 on the router. The other is on eth2 on the router which is currently not configured.  I was thinking eth2 would be my 44 net.  I have setup a DMZ so everything that comes in to eth0 goes to my computer (I have a lot of servers running on that machine so if you scan it you will get lots of hits.  Have fun until I lock it down). I'm hitting a snag on the very first part of router prep.  Where it says to edit the WAN_LOCAL rule set.  Under which do I add these?  Under source NAT rule or destination NAT rule? BTW I'm running ER3 Lite 1.10.11 on my router.  Once I figure out a few of these things I can take some snap shots of my setup to add to the wiki page to help future setups. Stephen Atkins VE6CPU/VE6STA/VE6SU Sent with Proton Mail <https://proton.me/> secure email. _______________________________________________ 44net mailing list --44net(a)mailman.ampr.org To unsubscribe send an email to44net-leave(a)mailman.ampr.org