On 16/02/16 21:56, Jean-Marc Magnier wrote:
(Please trim inclusions from previous messages) _______________________________________________ Hi Peter,
Ping to your IP from here works. Could you please verify that you get the range 44.151.178.0 in you 44 table please ? 73 QRO F1SCA
Hi Jean-Marc,
Yes as listed in the currents routing.
44.151.178.0 89.157.228.7 255.255.255.0 UG 0 0 0 tunl0
I can ping your commercial IP ok.
PING 89.157.228.7 (89.157.228.7) 56(84) bytes of data. 64 bytes from 89.157.228.7: icmp_req=1 ttl=45 time=935 ms 64 bytes from 89.157.228.7: icmp_req=2 ttl=45 time=324 ms 64 bytes from 89.157.228.7: icmp_req=3 ttl=45 time=323 ms 64 bytes from 89.157.228.7: icmp_req=4 ttl=45 time=327 ms 64 bytes from 89.157.228.7: icmp_req=5 ttl=45 time=321 ms
Just tried it again and all ok here now.
PING 44.151.178.2 (44.151.178.2) 56(84) bytes of data. 64 bytes from 44.151.178.2: icmp_req=1 ttl=63 time=989 ms 64 bytes from 44.151.178.2: icmp_req=2 ttl=63 time=322 ms 64 bytes from 44.151.178.2: icmp_req=3 ttl=63 time=327 ms 64 bytes from 44.151.178.2: icmp_req=4 ttl=63 time=325 ms 64 bytes from 44.151.178.2: icmp_req=5 ttl=63 time=332 ms
And I get your OpenWrt login page from your http address.
All good.
Regards ..... Peter ZL2BAU