Please explain by providing further details:
1) We have hard time setting up routing for 44/8. 2) By making us able to easily route 44/8 by ourselves then there is no need that we have to use other's resources.
73 de Marc, LX1DUC
Quoting YT9TP Pedja yt9tp@uzice.net:
(Please trim inclusions from previous messages) _______________________________________________ On 20.8.2013 20:46, Marc, LX1DUC wrote:
I'm running Mikrotik RouterOS on a machine directly connected to the Internet (it has a public IP, no NAT, no Firewall except it's own). I runs smoothly so far. I'm using a Python script from https://github.com/kd7lxl/hamwan_scripts/tree/master/amprupdate (I made a few customisations to address a issues with my specific setup) to create the IPIP interfaces, add routes and some routing policy rules (customisation).
The AMPR fullmesh works almost as well on Mikrotik as on Linux. I haven't had any issues with the IPIP fullmesh so far (on Linux and Mikrotik RouterOS).
We are using this Mikrotik machine in LX to connect some sites to the AMPR which are behind NAT and which cannot run their own IPIP interfaces. The NATted sites use OpenVPN (may we'll add SSTP) to connect to the Mikrotik machine. Within AMPR all the subnets are routed to the Mikrotik machine which routes them via the OpenVPN links to the remote sites.
One correction. You are not using just Mikrotik, but Mikrotik + Linux machine that fills it in with settings.
Appropriate solution I was talking about is using Mikrotik alone. If I have to set up Linux machine just to fill in Mikrotik settings that is something basically wrong with that requirement from my point of view.
That is why I suggested that, as that Python script runs fine and produces fine results, it could be good idea to run it on ampr.org site to create script file that sets up IPIP interfaces and routing, so we can download that script using Mikrotik device and run it within Mikrotik device to set up all things properly without need to set up external Linux machine to do the job.
I asked few times if anyone is using Mikrotik and is willing to export IPIP interface and routing settings to sent it to me to examine and see how this can be used in general. Noone responded.
So I have to disagree with your opinion. I can reach around 400 AMPR subnets of different size directly via the IPIP fullmesh (respectively with the help of my Mikrotik machine used as a tunnel server).
Networking is not an issue when routing works. We have hard time setting up routing for 44/8.
I intend to "open" my Mikrotik machine to other HAMs around the world having issues with NAT or ISP/University Firewall and hence cannot connect to the IPIP Fullmesh directly but I need to do some upgrades first (RAM, CPU, bandwidth).
That is very kind and generous but that means you would have to deal with additional traffic as routes for others will go through your router and internet connection.
By making us able to easily route 44/8 by ourselves then there is no need that we have to use other's resources.
Again, networking is not an issue. Problem is that we are actually forced to use special setup and additional hardware for 44/8 network.
Pedja YT9TP
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html