I get all the way to the section where it says I need to run 'sudo ./findpass.sh', and it gives me output of 'Tunnel Socket: Setting SO_BINDTODEVICE: No suck device'.
The instructions I am following are at: http://wiki.ampr.org/wiki/Ubuntu_Linux_Gateway_Example#Setting_up_the_Tunnel... And I am to the section of ' Finding the password for AMPR-RIPD"
The only section that had an issue during this process is the isc-dhcp-server will not start. I don't believe this should make any difference, other than if I have a client on my Ham Network that needs DHCP, but I plan to statically assign those devices.. so I believe that point should be moot.
My installation is Ubuntu 14.04.4 LTS I only have 2 interface.. eth0 (outside WAN address from ISP. One of my /29 allocations) and eth1 (inside 192.168.44.0/24)
I know enough to make my way around, but am not normally a linux guy!! Let me know what other info would be helpful to share out, so we can get this one going.
Thanks guys!!