Thank you all Currently the Cisco router that server as AMPRNET Gateway (in my case), sit in the home router DMZ I want to move it into the home router home network but i need to do some port mapping The home router does not have IPENCAP rules it only know to pass Protocols UDP /TCP and Port numbers ... So what Protocol /Port number consider IPENCAP ? Thanks FOrward Ronen - 4Z4ZQ http://www.ronen.org
________________________________________ From: 44Net 44net-bounces+ronenp=hotmail.com@hamradio.ucsd.edu on behalf of lleachii--- via 44Net 44net@hamradio.ucsd.edu Sent: Monday, March 21, 2016 4:21 AM To: 44net@hamradio.ucsd.edu Cc: lleachii@aol.com Subject: Re: [44net] ports / Protocoles needed to be opened for a gateway ?
(Please trim inclusions from previous messages) _______________________________________________ Ronen:
on the WAN interface allow: - IPIP Encap - IP Protocol 4
on your tunnel interface allow: - RIP44 - from 44.0.0.1 udp/520 to 224.0.0.9 udp/520
This information is available in the Wiki under: 'Setting up a Gateway with OpenWRT.'