Thanks for the explanation Tim.
I haven't messed with running a mail server since 1999 so a lot has apparently changed, and I am a bit concerned about doing it right.
Presently I am trying trying exim on a CentOS platform. It seems to send out mail just fine, but when it comes to answering someone else connecting to it from the general internet that is were I apparently don't have something configured right yet.
Anyone care to create a nice write up :-)
Maybe you are interested in these rules if you want to route your "from" amrprnet address back to Internet over ucsd
ip route add default via 169.228.66.251 dev tunl0 onlink table default
ip rule add from 44.1.2.3 table default
ip rule add from 44.1.2.3 to 44.0.0.0/8 table main
73,
Bob VE3TOK
On 14-08-11 09:31 PM, kb9mwr@gmail.com wrote:
(Please trim inclusions from previous messages) _______________________________________________ Thanks for the explanation Tim.
I haven't messed with running a mail server since 1999 so a lot has apparently changed, and I am a bit concerned about doing it right.
Presently I am trying trying exim on a CentOS platform. It seems to send out mail just fine, but when it comes to answering someone else connecting to it from the general internet that is were I apparently don't have something configured right yet.
Anyone care to create a nice write up :-) _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
Personally, I'd recommend to run Postfix as it's much more common and well known. If you go that route, I can give you a hand (email me directly). I've also heard that Exim works well but I've never used it. Sendmail is also still a valid option but for new installations, I'll always recommend Postfix first.
--David KI6ZHD
-
Boudewijn (Bob) Tenty -
David Ranch -
kb9mwr＠gmail.com