worth to read the wiki paragraph about Cisco http://wiki.ampr.org/wiki/Setting_up_a_gateway_on_Cisco_Routers Setting up a gateway on Cisco Routers - AMPRNet<http://wiki.ampr.org/wiki/Setting_up_a_gateway_on_Cisco_Routers&… wiki.ampr.org To create a gateway using Cisco equipment you must have a Cisco Router (preferred from series 2600 and above) Preferred with two Ethernet ports (but can be done also ... ________________________________ From: 44Net &lt;44net-bounces+ronenp=hotmail.com(a)hamradio.ucsd.edu&gt; on behalf of Paul Middlehurst &lt;paul(a)g1dva.net&gt; Sent: Sunday, September 4, 2016 8:47 AM To: 44net(a)hamradio.ucsd.edu Subject: [44net] Routing (Please trim inclusions from previous messages) _______________________________________________ I have configured a Cisco router, duel Ethernet interfaces on on of my static Internet addresses. The IPIP tunnel comes up and with wireshark I can see traffic in both directions to 169.228.66.251 pinging devices in the wider 44. network I never see anything being returned. Does the gateway router automatically have the reciprocal return tunnel / routes added (as per the Encap file) or is this something that needs requesting? Is there a good 44.131.x.x address to test against? 73 Paul - G1DVA _________________________________________ 44Net mailing list 44Net(a)hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net