14 Mar
2022
14 Mar
'22
6:21 p.m.
Hello,
Just got started on AMPR 44Net. Currently I have a /28 block and using Raspberry Pi 4 as
my IPIP gateway at home OTH. My set up is Verizon FiOS > Verizon Router (for all
none Ham stuffs) > DMZ from Verizon router to 192.xx.xx.144 (my Raspberry Pi gateway).
Raspberry eth0 is 44.xx.xx.1 as gateway and eth1 is 44.xx.xx.14 as tunl0 for my Ham
stuffs. My eth1 is connected to a 16 ports Ethernet switch to supply the connections to
all my Ham stuffs.
So far everything is working well. I was able to request an IP in the range of 44.xx.xx.2
– 44.xx.xx.13 no problem. Later a friend will help me setting up a Mikrotik router, I
just had to order one first. For right now Raspberry pi is what I will be using.
I have some questions that I was not sure or could not really find the answer to specific
questions.
Can I move my gateway over to VPS somewhere? Or the VPS setup is for the larger block not
for individual home use.
If I could do this using VPS then I could rent one up, no problem. I would also need some
sort of the instruction or guidance on how to set this up using VPS service instead of a
Raspberry Pi at home QTH.
The instruction I found is more like the set up for /24 BPG type of thing. I do not have
a use for that many IP addresses.
Another question is I have 2 blocks of addresses, obviously they were on a different
subnet. Could I use one Raspberry Pi gateway, one gateway address? If that is possible,
how do I add the 2nd block of IP range to my existing Raspberry Pi gateway setup or later
on Mikrotik box?
73, Kit W3KIT/ HS0ZOE
Sent from Yahoo Mail on Android
16 Mar
16 Mar
5:32 a.m.
Hi Kit,
On Mon, Mar 14, 2022 at 4:50 AM Komkit Listisard via 44Net <
44net(a)mailman.ampr.org> wrote:
Hello,
Just got started on AMPR 44Net. Currently I have a /28 block and using
Raspberry Pi 4 as my IPIP gateway at home OTH. My set up is Verizon FiOS
You could, but you would still need to get it back to your 'ham stuff'
which would likely mean creating a VPN between the VPS and something at
home. A Wireguard server installed on your VPS and Wireguard clients on
your 'ham stuff' or a router to which your 'ham stuff' is attached
should
work.
Verizon Router (for all none Ham stuffs) > DMZ
from Verizon router to
192.xx.xx.144 (my Raspberry Pi gateway).
Raspberry eth0 is 44.xx.xx.1 as gateway and eth1 is 44.xx.xx.14 as tunl0
for my Ham stuffs. My eth1 is connected to a 16 ports Ethernet switch to
supply the connections to all my Ham stuffs.
So far everything is working well. I was able to request an IP in the
range of 44.xx.xx.2 – 44.xx.xx.13 no problem. Later a friend will help me
setting up a Mikrotik router, I just had to order one first. For right now
Raspberry pi is what I will be using.
I have some questions that I was not sure or could not really find the
answer to specific questions.
Can I move my gateway over to VPS somewhere? Or the VPS setup is for the
larger block not for individual home use.
If I could do this using VPS then I could rent one up,
no problem. I
would also need some sort of the instruction or guidance on how to set this
up using VPS service instead of a Raspberry Pi at home QTH.
A VPS is going to have an OS installed, if its Ubuntu for example, there
are good instructions on the Wiki (https://wiki.ampr.org/wiki/Main_Page) --
then there is the getting it attached to your 'ham stuff' needs set up,
like I mentioned above.
The instruction I found is more like the set up for /24 BPG type of
thing. I do not have a use for that many IP addresses.
Have you reviewed the Wiki? For an IPIP tunnel setup, ignore the BGP
instructions.
Another question is I have 2 blocks of addresses,
obviously they were on a
different subnet. Could I use one Raspberry Pi gateway, one gateway
address? If that is possible, how do I add the 2nd block of IP range to my
existing Raspberry Pi gateway setup or later on Mikrotik box?
Why 2 blocks? How that would be all setup depends on a lot of variables in
between. Set one up first and then come back.
--
------------------------------
John D. Hays - K7VE
Kingston, WA
<http://k7ve.org/blog> <http://twitter.com/#!/john_hays>
<http://www.facebook.com/john.d.hays>
6:07 a.m.
John, I will do that over the weekend. I have VPS already but have not
install anything yet other than the OS. I requested 2 blocks because I
go back and forth between US and Thailand. While in Thailand I have to
use my Thai callsign, can not use US callsign there. At the end of the
day I think I still have to reapply it again with my Thai callsign
rather than US and return the 2nd block back to the pool.
I think I will have to digest this VPS and VPN business slowly, too much
to take in at once. But I will progress :D
73, Kit
On 3/15/2022 6:32 PM, K7VE - John via 44Net wrote:
Hi Kit,
On Mon, Mar 14, 2022 at 4:50 AM Komkit Listisard via 44Net <
44net(a)mailman.ampr.org> wrote:
Hello,
Just got started on AMPR 44Net. Currently I have a /28 block and using
Raspberry Pi 4 as my IPIP gateway at home OTH. My set up is Verizon FiOS
You could, but you would still need to get it back to your 'ham stuff'
which would likely mean creating a VPN between the VPS and something at
home. A Wireguard server installed on your VPS and Wireguard clients on
your 'ham stuff' or a router to which your 'ham stuff' is attached
should
work.
Verizon Router (for all none Ham stuffs) > DMZ
from Verizon router to
192.xx.xx.144 (my Raspberry Pi gateway).
Raspberry eth0 is 44.xx.xx.1 as gateway and eth1 is 44.xx.xx.14 as tunl0
for my Ham stuffs. My eth1 is connected to a 16 ports Ethernet switch to
supply the connections to all my Ham stuffs.
So far everything is working well. I was able to request an IP in the
range of 44.xx.xx.2 – 44.xx.xx.13 no problem. Later a friend will help me
setting up a Mikrotik router, I just had to order one first. For right now
Raspberry pi is what I will be using.
I have some questions that I was not sure or could not really find the
answer to specific questions.
Can I move my gateway over to VPS somewhere? Or the VPS setup is for the
larger block not for individual home use.
If I could do this using VPS then I could rent
one up, no problem. I
would also need some sort of the instruction or guidance on how to set this
up using VPS service instead of a Raspberry Pi at home QTH.
A VPS is going to have an OS installed, if its Ubuntu for example, there
are good instructions on the Wiki (https://wiki.ampr.org/wiki/Main_Page) --
then there is the getting it attached to your 'ham stuff' needs set up,
like I mentioned above.
The instruction I found is more like the set up
for /24 BPG type of
thing. I do not have a use for that many IP addresses.
Have you reviewed the Wiki? For an IPIP tunnel setup, ignore the BGP
instructions.
Another question is I have 2 blocks of addresses,
obviously they were on a
different subnet. Could I use one Raspberry Pi gateway, one gateway
address? If that is possible, how do I add the 2nd block of IP range to my
existing Raspberry Pi gateway setup or later on Mikrotik box?
Why 2 blocks? How that would be all setup depends on a lot of variables in
between. Set one up first and then come back.
17 Mar
17 Mar
1:02 a.m.
New subject: [just you] Re: New to 44Net with some rookie questions
THANK YOU!!
Rosy Schechter - KJ7RYV
Executive Director
Amateur Radio Digital Communications (ARDC)
ampr.org
On 3/15/22 3:32 PM, K7VE - John via 44Net wrote:
Hi Kit,
On Mon, Mar 14, 2022 at 4:50 AM Komkit Listisard via 44Net <
44net(a)mailman.ampr.org> wrote:
Hello,
Just got started on AMPR 44Net. Currently I have a /28 block and using
Raspberry Pi 4 as my IPIP gateway at home OTH. My set up is Verizon FiOS
You could, but you would still need to get it back to your 'ham stuff'
which would likely mean creating a VPN between the VPS and something at
home. A Wireguard server installed on your VPS and Wireguard clients on
your 'ham stuff' or a router to which your 'ham stuff' is attached
should
work.
Verizon Router (for all none Ham stuffs) > DMZ
from Verizon router to
192.xx.xx.144 (my Raspberry Pi gateway).
Raspberry eth0 is 44.xx.xx.1 as gateway and eth1 is 44.xx.xx.14 as tunl0
for my Ham stuffs. My eth1 is connected to a 16 ports Ethernet switch to
supply the connections to all my Ham stuffs.
So far everything is working well. I was able to request an IP in the
range of 44.xx.xx.2 – 44.xx.xx.13 no problem. Later a friend will help me
setting up a Mikrotik router, I just had to order one first. For right now
Raspberry pi is what I will be using.
I have some questions that I was not sure or could not really find the
answer to specific questions.
Can I move my gateway over to VPS somewhere? Or the VPS setup is for the
larger block not for individual home use.
If I could do this using VPS then I could rent
one up, no problem. I
would also need some sort of the instruction or guidance on how to set this
up using VPS service instead of a Raspberry Pi at home QTH.
A VPS is going to have an OS installed, if its Ubuntu for example, there
are good instructions on the Wiki (https://wiki.ampr.org/wiki/Main_Page) --
then there is the getting it attached to your 'ham stuff' needs set up,
like I mentioned above.
The instruction I found is more like the set up for /24 BPG type of
thing. I do not have a use for that many IP addresses.
Have you reviewed the Wiki? For an IPIP tunnel setup, ignore the BGP
instructions.
Another question is I have 2 blocks of addresses,
obviously they were on a
different subnet. Could I use one Raspberry Pi gateway, one gateway
address? If that is possible, how do I add the 2nd block of IP range to my
existing Raspberry Pi gateway setup or later on Mikrotik box?
Why 2 blocks? How that would be all setup depends on a lot of variables in
between. Set one up first and then come back.
1012
days inactive
1014
days old
5 comments
4 participants
participants (4)
-
K7VE - John -
Komkit Listisard -
Larry Crouch -
Rosy Schechter - KJ7RYV