44net

44net@mailman.ampr.org

3196 discussions

Re: Use of ARDC address space
by f5pbg＠free.fr 18 Jul '22

18 Jul '22

Hello, I remind you that it was I who delivered the IP you have... you better respect me... These are my IPs and they are not used for commercial applications contrary to what you claim in your claims. So I strongly advise you to stop your not very hamspirit activity... I guess the purpose was to try to harm me, you probably thought I wasn't reading the list... This kind of behavior deserves your allowance to be removed. but I have principles unlike you. You attack me personally then it remains a personal attack and I don't mix genres. So, for Christ, I have been managing IPs for a long time, even before the ampr.org server existed and long before this young F4HIN radio amateur was even a radio amateur... My 44.151.129 IP are not use for commercial use of course. The server belongs to my son indeed but I ask him for allocations, the IP 44.129 are mine. I know very well the goal of this young radio amateur f4hin, it is to take the management of the network in my place... So given what I read on telegram mailing lists, I wish you good luck... Best regards, Ludovic Vuillermet - F5PBG Coordinator of 44.151 Le 17/07/2022 à 12:50, F4HIN via 44net a écrit : > Hello > I'm going to tell you a story that does not makes me laugh at all. > I am part of an nonprofit ISP in France. > This ISP offers internet access, but also BGP tunnels to announce your own IP on the internet. > > Some time ago, by several discussions, I found that a person member of the association and not ham had an allocation /24 Hamnet announced via its own AS via the AS of the association. > Afterwards, after several information gathering, I noticed that this person was using it to propose hosting of small virtual machines and was allocating a Hamnet IP on these hosted VM. > I warned this person that he did not have to have a Hamnet block, and that he should not do this type of use since he is not a ham > His answer was clear "it's free, and I don't care". > > In reality, after searching on the AMPR portal, this block was assigned to a ham. This ham is the national Hamnet coordinator of a country, and the person using and misusing it is none other than his son who is not a ham! > I did not say anything until now, out of respect for the national coordinator. > > Today, there is a member of the association who complains about receiving scans from a Hamnet IP belonging to the block used by the non-amateur. > jul/15/2022 0l:02:56 system, error, critical login failure for user root from 44.151.129.214 via ssh > jul/15/2022 0l:02:56 system, error, critical login failure for user msfadmin from 44.151.129.214 via ssh > jul/15/2022 0l:02:57 system, error, critical login failure for user root from 44.151.129.214 via ssh > jul/15/2022 01:02:57 system, error, critical login failure for user root from 44.151.129.214 via ssh > jul/15/2022 0l:02:57 system, error, critical login failure for user postgres from 44.151.129.214 via ssh > jul/15/2022 01:02:58 system, error, critical login failure for user service from 44.151.129.214 via ssh > jul/15/2022 01:02:58 system, error, critical login failure for user vagrant from 44.151.129.214 via ssh > jul/15/2022 01:02:58 system, error, critical login failure for user admin from 44.151.129.214 via ssh > > To summarize, this person: > - Has a hamnet block without being a ham radio operator, > - Has obtained a legitimate hamnet block from another amateur radio operator, > - makes a "commercial" use of it by assigning IP to VMs for clients or friends of his, > - Let the VMs get drilled and scan/hacked with a hamnet IP. > > I think it's time to set the record straight, stop assigning blocks to people who use them for commercial or non-amateur use. > What do you think about it? > > -- > Gary > F4HIN > _______________________________________________ > 44net mailing list --44net(a)mailman.ampr.org > To unsubscribe send an email to44net-leave(a)mailman.ampr.org

3 2

Abuse or not abuse ?
by F4HIN 18 Jul '22

18 Jul '22

Hello I'm going to tell you a story that does not makes me laugh at all. I am part of an nonprofit ISP in France. This ISP offers internet access, but also BGP tunnels to announce your own IP on the internet. Some time ago, by several discussions, I found that a person member of the association and not ham had an allocation /24 Hamnet announced via its own AS via the AS of the association. Afterwards, after several information gathering, I noticed that this person was using it to propose hosting of small virtual machines and was allocating a Hamnet IP on these hosted VM. I warned this person that he did not have to have a Hamnet block, and that he should not do this type of use since he is not a ham His answer was clear "it's free, and I don't care". In reality, after searching on the AMPR portal, this block was assigned to a ham. This ham is the national Hamnet coordinator of a country, and the person using and misusing it is none other than his son who is not a ham! I did not say anything until now, out of respect for the national coordinator. Today, there is a member of the association who complains about receiving scans from a Hamnet IP belonging to the block used by the non-amateur. jul/15/2022 0l:02:56 system, error, critical login failure for user root from 44.151.129.214 via ssh jul/15/2022 0l:02:56 system, error, critical login failure for user msfadmin from 44.151.129.214 via ssh jul/15/2022 0l:02:57 system, error, critical login failure for user root from 44.151.129.214 via ssh jul/15/2022 01:02:57 system, error, critical login failure for user root from 44.151.129.214 via ssh jul/15/2022 0l:02:57 system, error, critical login failure for user postgres from 44.151.129.214 via ssh jul/15/2022 01:02:58 system, error, critical login failure for user service from 44.151.129.214 via ssh jul/15/2022 01:02:58 system, error, critical login failure for user vagrant from 44.151.129.214 via ssh jul/15/2022 01:02:58 system, error, critical login failure for user admin from 44.151.129.214 via ssh To summarize, this person: - Has a hamnet block without being a ham radio operator, - Has obtained a legitimate hamnet block from another amateur radio operator, - makes a "commercial" use of it by assigning IP to VMs for clients or friends of his, - Let the VMs get drilled and scan/hacked with a hamnet IP. I think it's time to set the record straight, stop assigning blocks to people who use them for commercial or non-amateur use. What do you think about it? -- Gary F4HIN

14 17

Waiting on IPs
by Clayton Singh 16 Jul '22

16 Jul '22

Hey, I am wondering who I need to contact to move my request for ip space along. AddedNetworkWaiting for 2022-06-02 07:58:15 44.135.0.0/24 coordinator 73, VE7OOT - Clayton

6 5

New to amprnet have some questions
by ken＠kc2idb.net 11 Jul '22

11 Jul '22

Hello all, So I have been assigned a block of IPs and have successfully created a gateway. I am able to pass traffic trough it as expected and it works as one would expect. However... My intended use case for amprnet includes a lot of VOIP traffic, which as we all know is heavily dependent on latency and bandwidth. I am currrently utilizing the IPIP tunnel approach to connect my gateway into the system. My questions are, 1. If I deploy my VOIP services on 44Net with my current configuration, what are the pitfalls? 2. If I announce my gateway via BGP will my throughput then be limited to uscd gateway, or will it be based on my connection speed? 3. I know some vpn capabilities have been introduced into the system, I presume that my connection will then be rated based on the connection at the VPN server location. Thank you so much! I appreciate the opportunity given here to learn and expand my knowledge. 73, de KC2IDB

5 4

No RX-packets receiving
by Dalibor Berka 26 Jun '22

26 Jun '22

Hello, Maybe someone can help me with below mentioned problem: I am starting amprnet net with that ampr-ripd using a script bellow #! /bin/bash # dotun.sh script written by N1URO on June, 2013 AMPRIP='44.177.10.10' IPMASK='255.255.255.255' HOST="medvidek.ddns.net" COMMIP=`host $HOST 2>/dev/null | head -n 1 | awk '{print $4}'` AMPRSERVER='169.228.34.84' echo $COMMIP modprobe ipip echo "1" > /proc/sys/net/ipv4/ip_forward ifconfig tunl0 $AMPRIP netmask $IPMASK ip tunnel change ttl 64 mode ipip tunl0 ip link set dev tunl0 up ifconfig tunl0 multicast /usr/sbin/ampr-ripd -t 1 -a $COMMIP -i tunl0 -p pLaInTeXtpAsSwD -f wlan0 -v -s -r ip route add default via $AMPRSERVER dev tunl0 onlink table 1 src $AMPRIP ip rule add from 44/8 pref 1 table 1 ip rule add to 44/8 pref 1 table 1 exit 0 And it worked well but now (and sometimes) I cannot receive packets from that AMPRSERVER to my tunl0 device on udp port 520 which is open (see below): root@raspberrypi:/usr/sbin# netstat -lntup | grep 520 udp 1152 0 0.0.0.0:520 0.0.0.0:* 14076/ampr-ripd and: root@raspberrypi:/usr/sbin# ifconfig tunl0 tunl0: flags=4289<UP,RUNNING,NOARP,MULTICAST> mtu 1480 inet 44.177.10.10 netmask 255.255.255.255 tunnel txqueuelen 0 (IPIP Tunnel) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 35280 bytes 9295234 (8.8 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Port 520 is also opened in net router and using: # tcpdump -i wlan0 port 520 I cannot see amprnet sevrver response. TKS/73 Libor, sysop of node OK2PEN-5

2 1

June 2022 ARDC News
by Dan Romanchik, KB6NU 22 Jun '22

22 Jun '22

This email requires a modern e-mail reader but you can view the email online here: https://www.ampr.org/?na=v&nk=91-ef731ef6ad&id=21. Thank you, Amateur Radio Digital Communications To change your subscription follow: https://www.ampr.org/?na=profile&nk=91-ef731ef6ad&nek=21-.

1 0

HamsrvPI
by Frederic Zulian 21 Jun '22

21 Jun '22

Hello, I'm looking for the iso image of HamsrvPI. hamserverpi.de/ no longer exists. Any ideas? Maybe another Linux distribution? Frédéric ZULIAN F1sxo

2 1

route entry in the RADB
by Christoph Heinecke 20 Jun '22

20 Jun '22

Hello list, maybe someone can help me and set a route entry in the RADB, or knows someone who could help me? I would like to route a /24 on the internet and for this I need the entry. Thanks a lot DO7IC Christoph

2 1

Need advise on getting on AMPRNet.
by Daniel Audet VA2DG 19 Jun '22

19 Jun '22

Hi i am seeking advise on what route i should take to setup a AMPRNet GW on my existing network. Already have a /25 subnet on 44Net. Right now i have the Archer 2600 as main router will all my wired and wifi devices with 4 access points to cover everything. I have lots of IoT devices, camera, IP phones, servers etc. over 100 devices. I am planing to set VLAN for IoT, IP-phone, Wifi Home, Wifi Guest, Server and hardwired PC and NET44. Here the possible combinations Main Router and AMPRNet GW. 1. TPLINK Archer 2600 as Main router with Ubiquiti EdgeRouter in the DMZ for Net44 2. TPLINK Archer 2600 as main router with Mikrotik Router in the DMZ Net44 3. Ubiquiti Edgerouter as main router with a VLAN and Tunel on AMPRNet. 4. Mikrotik router as main router with a VLAN and Tunel on AMPRNet What is the best one? Any suggestions are welcome -- */73's de VA2DG/* */Daniel/* Email: va2dg at va2dg dot ca

2 1

ARDC is hiring a Director of Technology!
by Rosy Schechter - KJ7RYV 16 Jun '22

16 Jun '22

Hello 44Net - I'm incredibly pleased to share that ARDC is seeking a Director of Technology (Tech Director). It's a much needed position at ARDC! This person's job will be to develop vision for and lead all of our technology efforts. These include: * general SysAdmin (with an existing service provider), * grants management software development (with an existing service provider) and * IPv4 network modernization and management. In addition to having solid technical knowledge and being an excellent manager, this person must also be an excellent communicator – able to write policy, wrangle volunteers, and manage open source technology development that includes both volunteers and contractors. This role will serve as the technical liaison to the ARDC Board of Directors and report to the Executive Director. Some important notes about this role: * The ideal candidate is a team player and team builder, able to identify requirements and expertise necessary for each of the above areas. We don’t expect one person to be able to do it all, but to define and build our technical capacity. * Experience and history with amateur radio and the internet is required. Many of the people we work with, projects we take on, and communities we make grants to are rooted in amateur radio, which has a long history and legacy. * This role is a hands-on job. Our expectation is that this person can manage our existing contractors and volunteers, while also participating technically. For a host of legal and administrative reasons, candidates must be located and legally able to work in the US. Full job posting and application instructions can be found here: https://ardc.applytojob.com/apply/bhhwDEgfza/Director-Of-Technology Please share with people who you think would be a good candidate, and feel free to ask any questions that you may have. Many thanks, Rosy -- Rosy Schechter - KJ7RYV Executive Director Amateur Radio Digital Communications (ARDC) ampr.org

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

44net