Hi OM I'm hoping to pick someone's brain with regards to the IPIP and RIP config for AMPRnet on my Mikrotik at home. I'm using the guide http://www.yo2loj.ro/hamprojects/ampr-gw-README.txt, which indicates after step seven and a few minutes of waiting I should see my routing table populated with routes with a 44rip routing mark. Nope. I've monitored for port 520 on the IPIP as well as Internet facing interface and see no activity. I also haven't seen a single packet on the ucsd-gw interface (not sure if I should at this time). So I'm obviously missing something important and perhaps fundamental in this configuration. Please send some of your wisdom my way. Regards Paul (ZS6IO)

On Nov 15, 2019, at 11:27 AM, Paul Greeff via 44Net <44net(a)mailman.ampr.org> wrote: Hi OM I'm hoping to pick someone's brain with regards to the IPIP and RIP config for AMPRnet on my Mikrotik at home. I'm using the guide http://www.yo2loj.ro/hamprojects/ampr-gw-README.txt, which indicates after step seven and a few minutes of waiting I should see my routing table populated with routes with a 44rip routing mark. Nope. I've monitored for port 520 on the IPIP as well as Internet facing interface and see no activity. I also haven't seen a single packet on the ucsd-gw interface (not sure if I should at this time). So I'm obviously missing something important and perhaps fundamental in this configuration. Please send some of your wisdom my way. Regards Paul (ZS6IO) -- Paul Greeff email(a)paulgreeff.com Office: +27 86 100 3117 Cell: +27 83 954 3453 Fax: 086 659 0511 Winlink: zs6io(a)winlink.org _________________________________________ 44Net mailing list 44Net(a)mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net

Thanks Marius and everyone else. RIP updates eventually did come through. However, I greatly overestimated the capabilities of my little HAPlite and promptly killed it. It got up to 700 odd routes and fell over at around 500 ipip interfaces. I will need to upgrade to something a little more beefy. Regards Paul On Sat, Nov 16, 2019 at 3:56 AM ai6bx.keith &lt;ai6bx.keith(a)verizon.net&gt; wrote: > I am having essentially the same issue and looking for guidance myself. > > Keith Ai6bx > > Sent from my iPad > >> On Nov 15, 2019, at 11:27 AM, Paul Greeff via 44Net < > 44net(a)mailman.ampr.org&gt; wrote: >> Hi OM >> >> I'm hoping to pick someone's brain with regards to the IPIP and RIP > config >> for AMPRnet on my Mikrotik at home. >> >> I'm using the guide http://www.yo2loj.ro/hamprojects/ampr-gw-README.txt, >> which indicates after step seven and a few minutes of waiting I should > see >> my routing table populated with routes with a 44rip routing mark. Nope. >> >> I've monitored for port 520 on the IPIP as well as Internet facing >> interface and see no activity. I also haven't seen a single packet on the >> ucsd-gw interface (not sure if I should at this time). So I'm obviously >> missing something important and perhaps fundamental in this > configuration. >> Please send some of your wisdom my way. >> >> Regards >> Paul (ZS6IO) >> -- >> Paul Greeff >> email(a)paulgreeff.com >> Office: +27 86 100 3117 >> Cell: +27 83 954 3453 >> Fax: >> 086 659 0511 >> Winlink: >> zs6io(a)winlink.org >> _________________________________________ >> 44Net mailing list >> 44Net(a)mailman.ampr.org >> https://mailman.ampr.org/mailman/listinfo/44net >