i used to have at my old place a d-link that work good without problem
here i use cable modem from this firm ...
http://www.hot.net.il//heb/Internet/services/hotbox2/
and i do ipip without problem
at the guy we have troubles we have the DGN2200 router and it doesnt work the cisco
tunnel interface see no incoming packets
he changed now to siemens dsl modem SL2-141 and still no packet coming from UCSD
we will try to make a tunnel between our-self and try to debug ...
I wish there were more good debugging tools for IPIP
Regards
Ronen-4Z4ZQ
http://www.ronen.org
Ronen Pinchooks (4Z4ZQ)
WebSite<http://www.ronen.org/>
www.ronen.org
ronen.org (Ronen Pinchooks (4Z4ZQ) WebSite) is hosted by
domainavenue.com
HOT - ??? HOTBOX2<http://www.hot.net.il//heb/Internet/services/hotbox2/>
www.hot.net.il
hotbox2 ??? ??? ?????, ????? ???? n, ?????? ????? ????? ????? ???, ????? ???? ?????
?????????? ...
________________________________
From: 44Net <44net-bounces+ronenp=hotmail.com(a)hamradio.ucsd.edu> on behalf of
lleachii--- via 44Net <44net(a)hamradio.ucsd.edu>
Sent: Thursday, August 25, 2016 3:32 PM
To: 44net(a)hamradio.ucsd.edu
Cc: lleachii(a)aol.com
Subject: Re: [44net] DGN2200 ADSL router and IPIP
(Please trim inclusions from previous messages)
_______________________________________________
Additionally, for reference:
- Some D-Link devices have the: TCP, UDP, and an OTHER option. Selecting
"OTHER," entering your destination LAN IP, and placing the number "4"
in
the field will NAT IPENCAP.
- All DD-WRT, OpenWRT and Microtik devices are known to accept DNAT
configurations for IPENCAP.
- Any device that can accept a DNAT rule for IP Protocol Numbers
(specifically, IP Protocol Number 4/IPENCAP) should work also.
- Lynwood
KB3VWG
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net