+1 on the DMZ feature. I found a manual for the HGB10R-02, and there is a
DMZ
feature under Advanced Setup > NAT > DMZ Host. I hope that works for you.
73,
Lee K5DAT
On Wed, Sep 28, 2022 at 6:30 PM Marius Petrescu via 44net <
44net(a)mailman.ampr.org> wrote:
Hi Libor,
You can try to use the DMZ feature if available. Normally, that will
fully forward any traffic, including proto-4.
Marius, YO2LOJ
On 28/09/2022 22:07, Libor Berka via 44net wrote:
Hello
I started to have that problem to receive no response from
169.228.34.84 using
ampr-ripd program. I had en old net modem changed by my provider
for HGB10R-021 modem to have more internet speed and really
there is not possible to configure protocol-4, only TCP USB or BOTH.
So I am already more weeks without axip links.
I have no idea how to resolve this problem.
73 Libor, sysop of OK2PEN-5 amprnet gate IP 44.63.16.113.
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org